The best flat roof roofing material is undoubtedly a single sheet of rubber tailor made for weather-proofing flat roofs, such as for example Firestone’s EPDM product.
That is laid directly onto roof boarding, itself supported by the roof rafters and nagging. Insulating material is normally laid in the space between your two, and if you’re renewing your flat roof anyway you might as well take the opportunity of renewing that at the same time.
This will almost certainly be the recommendation you obtain from any reputable builder or roofer advising you on replacing your existing flat roof.
Until recently the most popular material for a fresh flat roof was bituminous felt laid in three layers, the first layer nailed down and top of the two bonded to the main one beneath with mastic bitumen. Based on the material used, this could mean heating a good bitumen-based compound to make it liquid, and pouring it onto the underlying felt and spreading it evenly over the whole section of the roof.
Then Roof Cleaning in Stamford had to wait for the compound to cool before applying another layer, and at the end spreading a layer of stone chippings on the roof and bonding it with a chipping compound, this being to reflect natural sunlight and prevent the felt and bitumen degrading quickly.
This was altogether a fairly messy, complicated and time-consuming job best left to the professionals. In addition, there were several stages where it was very easy to fail to make the roof weather-proof, e.g. where in fact the edge of the felt met the prevailing tile or slate roofing of the pitch roof.
On top of that, if, or rather when, there developed a leak in the flat roof, it will be very difficult and messy to discover exactly where the rain was getting back in. Seldom would the manifestation of the leak on the ceiling of the area below be directly below the source of it. Water could get by way of a weakness in the bitumen felt and travel along a rafter before descending to the ceiling board below.
The brand new generation of rubber-based flat roofing systems are far superior. Assuming you have reasonable DIY abilities then you can probably do it yourself, with one other person to assist. You can easily find a local supplier of rubber flat roof roofing material online, and the existing price is only around ï¿½6.65 per square metre.
Most suppliers slice the material to the exact shape and size that you require so are there no unnecessary joins, meaning no weaknesses and an exceptionally long-lasting, leak-proof roof.
The vital the main whole process is to make sure that there are no gaps between the rubber roof and any existing pitch roof where rain may penetrate. To ensure there are no problems it is vital to run the rubber material up and under the tiles or slates of the adjoining pitch roof so that any rain dripping from the lower-most row falls onto the rubber, with no chance for it over-lapping the edge and getting underneath the pitch roof.
Also, make sure that the prevailing slope of the flat roof towards the guttering or other means of water escape is maintained. The rubber is merely glued onto the roof boards and sealed where appropriate with metal brackets or bitumen so that rain penetration is impossible. Mind that the glue covers the whole of the underneath of the rubber so as to avoid bumps in the top that could obstruct the drainage of the water away.
Rubber roofs have been proven to last for well over 50 years under all weathers, so that it really is the only real flat roof roofing material you need to consider when deciding on a new flat roof.